How To Install A Zip Line For Kids

Steps Download Article

1

Select a distance between ii solid objects, Preferably the objects should be trees or other solid structures. ^[1] The altitude should be anywhere from 50 anxiety (15.2 m) to 500 anxiety (152.iv m).
2

Lay the cable out between the two points. You will demand enough cable and then there is suitable slack when information technology's stretched out between the two points. This slack should course a belly in the cable between the points. You never want to stretch the cable too tight.^[2] This creates a dangerous situation of speed and crashing at the other end, and your last words will exist, "Hey, sentinel this!" before you're taken to the infirmary.

Advertisement
3

Adhere cable to ane point. If you are attaching to a tree, wrap the cablevision effectually the tree a few times and then clamp the free terminate to the leading end. Use high quality clamps that are sized for the cablevision diameter. These clamps will require you to tighten with a socket ready. Two clamps half dozen inches apart are practiced. Three or 4 clamps add together the necessary safety.^[3] The other stop of the cablevision is where y'all volition tighten it up and raise information technology off the footing.
4

Attach a temporary cable clamp about xx feet (half dozen.1 m) from the end of the cablevision. Attach the winch to this clamp and to a bespeak on the tree. Winch the cable up. Once information technology'south winched up, the complimentary end of the cable can be wrapped around the tree and and so clamped on its leading stop to hold it in place.^[4] Try to have the clamps about viii-feet from the tree. At this signal the winch can be taken off the first clamp and and so reinstalled on the furthest out permanent cable clamp. This allows for adjustments to be made on the cablevision. As the cablevision stretches, it will need to be tightened with the winch.
5

Determine who goes first. This is a nerve-wracking decision. Testing the nothing line is important.^[5]

Advertizing

Add New Question

Question

How practice I brand sure a zip line has the right corporeality of rope?

When you buy the cables for the the zippo line, just make certain y'all have 15-20 ft. of extra cablevision to business relationship for slack. (You'll need to mensurate the length of your zippo line area as well.)
Question

How can yous set up a cypher line if you don't have any copse?

Yous would have to build a system that would supplant the trees, like some steel posts. They must be able to agree the weight though. It volition be more difficult and costly.
Question

How practise I get the other end of the cable to the other side?

You tin can lasso it to someone on the other side and the i on the other side tin can tie it on the object. If there is noone on the other side, yous will have to engineer something that tin can aid you.
Question

What happens if someone gets hurt on a zip line?

Jammie Cheung

Community Respond

If the injury is bad, call 911 or other emergency lines and ask for medical aid. Later on accessing any injuries, slack the rope more so either the speed is lost more, making the zip line slower, or tighten the cable clamps if it fell off.
Question

What if y'all don't have a tree?

Idabelle

Community Reply

If yous don't accept any trees, y'all volition accept to utilise something like a steel pole, instead.
Question

What should the meridian be when constructing a zipline?

Start at about xx feet. Then go down to 5 feet because your weight will bring the cablevision downwards.